Flat Roofing

Low-slope is a different trade — membrane, drainage, and seams

Flat Roofing in Conroe, TX: Low-Slope Done Right

A flat roof in Conroe is rarely flat, and it is never a shingle job. Water does not run off a low-slope roof — it has to be drained off it, and on a shaded lot under pines it sits, ponds, and works at the seams. We install and repair low-slope membranes — TPO, EPDM, and modified bitumen — for the small flat areas on homes, such as porch roofs, room additions, and sunrooms, and for the low-slope sections on modern homes built with flat planes by design. The membrane, the drainage, and the seams are the job.

TPO, EPDM & modified bitumenPonding & drainage correctedMon–Sat 8 AM–8 PM
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What Our Flat Roofing Covers

Low-slope work splits two ways — the small flat areas on a home, and the commercial roof. Here is what each covers.

01

TPO Membrane

Thermoplastic membrane, mechanically fastened over insulation — the welded-seam surface for a low-slope section that has to shed a Conroe downpour, from a porch roof or room addition to a small shop roof.

02

EPDM Membrane

Rubber membrane for a low-slope section that moves with the deck — the flexible surface for residential additions and sunrooms, where the seams are the detail that matters and are checked on every visit.

03

Modified Bitumen

Two-ply modified bitumen where a residential low-slope section takes foot traffic — the addition roof the AC tech crosses, the patio cover walked on to clear the gutters — the membrane that takes being walked on without puncturing.

04

Ponding and Drainage Correction

A Conroe downpour drops a lot of water on a low-slope roof in a short time, and a roof that cannot drain it ponds. We correct the fall, clear the drains and scuppers of needle litter, and fix the low spots where water sits after rain — so the next downpour has somewhere to go.

05

Seam and Flashing Repair

Welded-seam failure and punctures from foot traffic and fallen limbs are the common failure pattern on Conroe flat roofs. Seams are re-welded or patched; flashing at walls and curbs is rebuilt.

06

Residential Low-Slope Sections

Back porches, room additions, tie-ins behind a garage, sunrooms, and patio covers — usually the shadiest part of the house, sitting directly under the heaviest part of the canopy.

Service overview

What Flat Roofing in Conroe Really Involves

Flat roofing in Conroe is a membrane job, not a shingle job. The membrane — TPO, EPDM, or modified bitumen — is laid over insulation on a low-slope deck, the seams are welded or adhered, and the flashing at walls, curbs, and drains is finished so water has somewhere to go. A shingle on a low slope holds water against the laps and leaks; a membrane sheds it, as long as the drainage works and the seams hold.

Residential flat work here is repair-heavy and shade-driven. The flat section is usually the shadiest part of the house, sitting directly under the heaviest part of the canopy, so ponding, slow drainage, membrane punctures from fallen limbs, and seam failure are the pattern — and pine needles in the drains make all of it worse. The other flat roofs in Conroe are the small ones on homes — porch roofs, additions, sunrooms — and the modern homes built with low-slope sections by design. Those are the flat roofs this page is about; the big commercial fields are covered on the commercial side. Heat matters too — a reflective TPO surface is sold on energy efficiency in Conroe's hot, humid climate, and it is a real consideration on a big low-slope roof. For the commercial side, see commercial roofing.

Ponding is the slow killerStanding water works at seams and flashing a little every rain. Correcting the fall and clearing the drains is part of the repair, not an extra.
Shade drives residential flat workPorch roofs and additions sit under the heaviest part of the canopy — ponding, slow drainage, and limb punctures are the pattern.
Commercial is the volume caseMost of Conroe's commercial stock is low-slope. TPO over insulation is the common reroof for warehouse and retail.
School flat roof with HVAC units
How we workWe verify the cause, compare realistic options, and confirm the scope before work starts.

The service timeline

How Our Flat Roofing Process Runs

A membrane is only as good as its seams and its drainage. The sequence checks both.

01

Inspection

We walk the membrane, check the seams, the flashing at walls and curbs, and the drains and scuppers — and look from underneath for the stain that says where water has been sitting. The inspection is run as a roof inspection, with photos and a written scope.

Stage 1
02

Written Scope

Membrane type, drainage correction, and seam work are priced line by line. If the membrane has failed across the whole roof, we say so and explain the replacement option.

Stage 2
03

Preparation

Debris and needle litter are cleared, the deck is checked where the membrane has failed, and the surface is prepared for the new membrane or the patch.

Stage 3
04

Membrane and Seams

The membrane goes down, seams are welded or adhered, and flashing is finished at walls, curbs, and drains. Drainage is corrected so water has somewhere to go.

Stage 4
05

Check and Walk-Through

We check the seams and the drainage, photograph the finished details, and walk you through what was done and what to watch for — especially the drains after the next needle drop.

Stage 5

Tools methods

Tools and Methods We Use on Flat Roofs

Membrane tools, not shingle tools — the seam is the roof.

01

Heat welder

Fuses TPO seams on a residential low-slope roof into one continuous sheet — the seam becomes part of the membrane, not a line across it.

02

Seam roller and probe

Presses each weld flat and probes the seam edge, so a weak joint is caught while the crew is still on the roof — not at the next rain.

03

Moisture meter

Reads moisture through the membrane, so wet insulation or soft decking under a sound-looking residential flat roof is found before new membrane goes over it.

04

Utility knife and straight edge

Cuts membrane and flashing cleanly, so patches and details sit flat instead of curling.

05

Drain and scupper tools

Clears drains and scuppers of needle litter and checks the fall, so water leaves the roof instead of ponding on it.

06

Roof safety harness and ladder stabilizer

Fall protection and stable ladder access on every job, on every pitch.

Use cases

When Conroe Homeowners Call Us for Flat Roofing

These examples show how the service framework adapts rather than forcing every call through one repair.

Flat-roof drain detail
Ponding on a Porch Roof in River PlantationA porch roof under mature pines, with water standing for days after rain and a seam that has started to lift at the wall. The scope for a roof like this is drainage correction and a seam repair — and a check of the drains, because needle litter is usually half the problem.

Addition Tie-In in Grand Central Park

A room addition with a low-slope tie-in behind the garage, leaking where the flat section meets the shingle roof. The scope is the transition detail — the flashing and membrane at the tie-in — not the shingles above it.

Porch Membrane Under Pines in River Plantation

A porch roof under the heaviest part of the canopy, ponding after every downpour with the drains clogged by needles and a seam lifting at the tie-in. The scope is the fall corrected, the drains cleared, and the seam re-welded — low-slope work, not a shingle patch.

Problems we solve

Flat Roof Problems We Solve for Conroe Homeowners

Most of the flat-roof calls we get in Conroe trace back to one of these problems.

ISSUE

Ponding water that never drains

Standing water works at seams and flashing a little every rain. We correct the fall, clear the drains and scuppers, and fix the low spots where water sits.

SYMPTOM

Seam failure and membrane punctures

Welded-seam failure and punctures from foot traffic and fallen limbs are the common failure pattern. Seams are re-welded or patched; punctures are patched with the membrane, not with sealant.

SIGN

Leaks at walls and curbs

Flashing at walls, curbs, and rooftop equipment is where a flat roof usually leaks first. We rebuild the flashing detail rather than sealing over it.

ALERT

A coating sold as a replacement

A coating sold as a replacement for a failed flat roof is a sale, not a repair. A coating extends the life of a sound membrane; on a residential flat section that has failed, the answer is a new membrane. See roof coating.

How an estimate works

How Your Flat Roofing Estimate Is Put Together

We do not publish prices — a porch membrane and a warehouse reroof are different jobs. Here is what shapes the estimate.

Phase 01

Membrane system

TPO, EPDM, or modified bitumen — and the insulation beneath it. The system is chosen for the slope, the drainage, and the exposure — a porch roof under pines needs different drainage than a sunroom in the open — not for the brochure.

Phase 02

Size and drainage

Square footage sets the material, and the drainage correction sets the work. A roof that ponds needs fall and drains fixed, not just a new membrane.

Phase 03

Condition underneath

Wet insulation and soft decking under a membrane that looks sound from above. We check before the scope is written, so the estimate is the whole job.

Customer reviews

What Conroe Homeowners Say

5.0★★★★★19 Google reviews
★★★★★

Mr. Britt Cartwright and his crew made the investment worthwhile indeed specially knowing that they also have the needed experience working with the solar panel company to get the panels re-installed right the first time!

★★★★★

We were referred to Britt from someone else in our neighborhood. I cannot say enough good things about this company. They delivered an amazing roof and made sure we were happy every step of the way.

★★★★★

Just got a new roof with Squared Up Roofing on June 29, 2024 and I am very pleased! Mr. Britt and his team showed up and showed out. Mr. Britt operates with great Integrity and is a great person as well.

★★★★★

What can you say about a company that actually does what they promise!! Well Squared Up truly is that company. I was pretty nervous about replacing my roof but Britt walked me through the entire process and was there for me every step of the way.

Questions before we arrive

Flat Roofing Questions Conroe Homeowners Ask

Roofing crew silhouetted at sunset
Call (936) 693-8377
Can shingles go on a flat roof?

No. Shingles on a low slope hold water against the laps and leak. A low-slope section needs a membrane — TPO, EPDM, or modified bitumen — with welded or adhered seams and proper drainage. That is why porch roofs, additions, and sunrooms are membrane work even on a shingle house.

Why does my flat roof pond after rain?

Because the fall is wrong, the drains are clogged, or the deck has sagged — and on a shaded Conroe lot, pine needles in the drains make all three worse. Standing water works at the seams a little every rain, so ponding is corrected as part of the repair, not ignored.

How long does a TPO roof last in Conroe?

It depends on the membrane, the seams, and the traffic — and on keeping the drains clear of needle litter. We do not publish a single lifespan figure, because the roof, the exposure, and the maintenance all move it. The scope and the inspection tell you where your roof stands.

Is a roof coating a cheaper alternative to a new flat roof?

A coating is a life-extension option for a sound membrane — it can extend the life of a low-slope roof that is still working. It is not a substitute for replacing a failed flat roof, and it is never a substitute for a shingle roof — one local competitor declines coating over a tired shingle roof outright, and so do we. See roof coating.

Ready when you are

Get Your Flat Roofing Estimate in Conroe

One inspection, a written scope, and a straight answer on membrane versus repair. Call (936) 693-8377, Monday to Saturday, 8 AM to 8 PM.

Parapet wall flashing on a flat roof with metal coping

Talk with the local team

Request Flat Roofing

Call (936) 693-8377 to book a roof inspection or talk through a low-slope roof. We answer during business hours, Monday to Saturday, 8 AM to 8 PM, and return after-hours calls the next business morning.

16454 Hickory Rd, Conroe, TX 77302, United StatesMain office technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now